S-01
Building Management Systems: design, supply and integration
Open-protocol BMS engineered from the points list up, integrating every building system over BACnet, Modbus, KNX, LonWorks and OPC.
S-01 / 01
Overview
A building management system is only as good as its engineering. We design the BMS from the points list up: what each piece of equipment must report, what it must be told, and how operators will see it. Then we supply, program and integrate it on open protocols, so every system in the building appears in one place and the owner keeps full control of it.
Scope of work
- System architecture and network design (field, automation and management levels)
- Points list and I/O schedule for every controlled item of equipment
- Controller selection, panel sizing and bill of materials
- Operator workstation, graphics, alarms, trends and reports
- Integration of third-party systems over BACnet, Modbus, KNX, LonWorks and OPC
- Remote access and user roles for the facility team
Deliverables
- 01System architecture and riser diagrams
- 02Points list and sequences of operation
- 03Panel drawings, wiring diagrams and data sheets for approval
- 04Configured controllers and operator graphics
- 05Test and commissioning records, as-built documents and backups
Protocols and technologies
- BACnet/IP
- BACnet MS/TP
- Modbus TCP/RTU
- KNX
- LonWorks
- OPC UA
- SNMP
- MQTT
Typical applications
- New buildings
- Retrofit and migration of legacy BMS
- Multi-building campuses
- Central plant supervision
How we deliver it
- 1
01
Survey
We walk the site, review drawings and the BOQ, and agree what the system must do before anything is priced.
- 2
02
Design
System architecture, points list, controllers and network, sized to the real equipment and the consultant's specification.
- 3
03
Engineering & submittals
Shop drawings, panel layouts, wiring diagrams, sequences of operation and data sheets, submitted as one complete package.
- 4
04
Supply & installation
Controllers, field devices and panels supplied to the approved submittal, installed and terminated under our supervision.
- 5
05
Programming & integration
Sequences, graphics, alarms, trends and third-party interfaces are programmed and tested in-house before we reach site.
- 6
06
Testing & commissioning
Point-to-point checks, functional tests and witnessed commissioning, with every result recorded.
- 7
07
Handover & support
As-built documents, backups and operator training, followed by maintenance and support contracts.
Related services
RFQ · SYNEX
Discuss your project with an engineer
Share your drawings, BOQ or specification and we will reply with a clear scope and quotation.